Table of Contents
What lights are suitable for showers?
The lighting in the shower is the best.
Do bathroom lights need to be waterproof?
Zone 0 refers to lights that will be fully submerged in water, such as inside a bath or wet room floor. You will need a special license to use the lights.
What are the regulations for bathroom lights?
Zone 1 is the area above the bath or shower that is higher than the floor. It is generally accepted that a rating of 65 is needed in this zone. Most shower lights are rated at 65 degrees.
Can you use normal lights in a bathroom?
It’s perfectly fine to use ordinary light fittings in a bathroom if you follow some simple guidelines, despite the fact that there are safety regulations for electric light fitting near water.
What type of lights are suitable for bathrooms?
Incandescent bulbs should have a white color that is indicated by a warm white or cool white symbol. If the CRI is 90 or above, compact fluorescent bulbs are a good choice for the bathroom.
Do bathroom lights have to be IP rated?
Measuring its proximity to a water source or receptacle is the basis for determining the bathroom lighting’s intellectual property rating. Zone 1 is for areas directly above a shower or bath and Zone 2 is for areas within 60 cm of a water source.
Where should a shower light be placed?
It should be placed 75 to 80 inches above the floor so that it can be spread over a fixture that is at least 24 inches long so that the light will wash over the hair and face.
How many can lights in shower?
For safety and style, opt for two or more in large or luxury showers, even if it’s only one light.
How many recessed lights do I need?
The total amount of can lights divided by 60 watt is called the total amount of can lights. 60 is the bulb wattage I’d like to use, so the room must be divided by 180 to get 6.
How many can lights for a 12×12 room?
The rule of thumb is between the cans and the wall. You would probably want two rows of lights in a 12 foot room. It’s a bedroom and you don’t need it as bright as a kitchen, so you can probably get away with 2 rows of 4 lights.
How many can lights to put in?
If you add new lighting, make sure it works with your old lighting. Take a look at your room to see how much you need. The rule of thumb is to use one light for every 4 to 6 square feet of ceiling space.
Can you have spotlights above a shower?
As long as your ceilings are outside of electrical zones 0 to 2, it’s always recommended that you use lighting with an IP 44 rating or better. If you want to use your downlights directly above a bath or shower, you should consider models with a rating of 65.