T12 is the most common of the three types of tube lights. T8 is a tube of 8/8ths of an inch, or 1 inch, which is why it is referred to as a tube.
Table of Contents
How do I know what size fluorescent light I have?
The easiest way to find out which size you need is to look at the label. You can measure the bulb’s diameter if the information isn’t still legible. The eighths of an inch is the measurement for fluorescent tubes.
Can I replace fluorescent tubes with LED?
Is it possible to replace fluorescent tubes with light emitting devices? It is possible to replace fluorescent tubes withLED tubes. Plug-and-play, direct wire, and hybridLED tubes are available if you don’t want to replace the fluorescent fixture.
What do the numbers on a fluorescent bulb mean?
Lamps are usually identified by a code such as FxxTy, where F is for fluorescent, the first number indicates either the power in watt or length in inches, the T indicates that the bulb is tubular, and the last number is the diameter.
What happens if you put a T8 bulb in a T12 fixture?
T8 and T12 tubes have different diameter. T12 tubes are larger than T8s by an inch. socket sizes, lengths, and distance between pins are the same. If you try to install the T8 tubes in a T12 fixture, they will fit.
Do T8 and T12 bulbs use the same socket?
T12 and T8 bulbs use magnetic and electronic ballasts, respectively. Even though the fluorescent light sockets are the same, they can’t use the same ballast.
How do I know if my ballast is T8 or T12?
The size of the tube is the most accurate way to determine the type you have installed. The T8 and T12 tubes are the same size.
How do I know what type of ballast I have?
It is possible to determine if you have a compatible fixture in a few seconds. You can take a photo of the fixture by turning on the light and taking a photo. If there are no dark bands on the image, you can use an electronic ballast.
Will a T8 work in a T12 ballast?
Unless the T12 fixture is replaced with a T8 ballast, a non-direct-wire compatible T8 lamp won’t work.
How do you know if it’s the ballast or the bulb?
Take out your old bulbs and replace them with new ones. 9 out of 10 times the ballast is to blame for the bulbs failing to light up. An analog multimeter has a needle that will sweep to the right when it’s good. The needle wouldn’t move if the ballast was bad.
What is a Type A ballast?
There are two types of tubes: type A and type B. Plug & Play lamps are type ALED tubes. The tubes use the same lamp as the original one. Control and safety are some of the benefits of Type ALED tubes.
What does T12 mean in fluorescent bulbs?
A T12 lamp is twelve-eighths of an inch, or one and one-half inches, in diameter. A T8 lamp is eight-eighths of an inch, or two inches, in diameter.
Are T8 and T12 fluorescent bulbs interchangeable?
T12 and T8 bulbs use magnetic and electronic ballasts, respectively. If you want to upgrade from a T12 to a T8 bulb, you need to change out the ballast.
Are T12 fluorescent bulbs being phased out?
Legislation went into effect in July of 2012 that eliminates nearly all 4-foot T12 lamps, some 4-foot T8 lamps, most 8-foot T12 lamps, and almost all standard halogen PAR38, PAR30 and PAR20 lamps. T12 technology has been around for more than 80 years. Lamps and bulbs have improved since then.
Can I replace a T12 ballast with a T8?
Replacing a T12 with a T8 linear fluorescent is the least expensive option. They are the go-to option when it comes to pre-existing T12s. If you still have magnetic ballasts, you’ll need to swap them for T8s. There is an option to retrofit the light bulbs.
How do you convert a T12 fluorescent bulb to LED?
There are six different options to choose from if you want to convert your T12 lamps to LEDs.
What are the different types of fluorescent lamp?
How do I know which fluorescent bulb to buy?
You will need to know the diameter and width. The number is expressed as T8 or T 12. The number is a measurement of the diameter, and it is referred to as the tubular number. The T8 is the diameter of the bulb and it is eight inches.
What is difference between T5 and T8 fluorescent?
T5 and T8 light bulbs have different lengths and diameters. The T8 tube is much larger in diameter than the T5 tube. The two tubes are not interchangeable, so this factor is important when looking at a fixture.
Can you replace 4ft fluorescent with LED?
It is possible to replace fluorescent tubes withLED tubes. If the bulb is compatible with the fluorescent in the fixture, you can simply replace it with the LEDs.
Are LED lights fluorescent?
What is the difference between fluorescent and light emitting devices? Solid state technology such as LEDs and fluorescent bulbs have gasses in them. The UV radiation produced by the fluorescent lights is converted into visible light through the use of a phosphor coating inside the bulb.