If applicable, divide the width by the length of the room. If you divide the result by 1.5, you can determine how much light the room will get. For a room that is 10 feet wide by 12 feet long, you can use 10 times 12 to get 120 and 1.5 times 12 to get 180 watt hours.
Table of Contents
How many watts do I need for a bedroom light?
The best light bulb to use in a bedroom is 800lm. This is the same bulb as an older one of 60 watt. The light will be bright enough to read by but not so bright that you will have a hard time sleeping.
How much watt LED bulb is required for a room?
It is easier to talk about bulbs in terms of watt than it is in terms of lm. If a 100 watt bulb produces 1,500 lm, and a 10 watt bulb does the same, the 10 watt bulb may state on its label that it is 100 watt equivalent.
Which is better 40W or 60W?
If the package says the bulb uses 60 watt, that means it will use 60 watt of electrical power. A 40 watt bulb is equivalent to 400+ lm, which is the brightness of a bulb. The higher the wattage, the higher the lm.
Is it OK to use a 60 watt bulb in a 40 watt lamp?
The rating has to do with heat and fire in order to make the bulb burn out quicker. The fixture may only be designed to handle 40 watt heat. If you put in a 60W, the heat increases, there’s not enough air, and the bulb fails because of the higher heat.
What is a good wattage for a light?
It should be around 60 watt for a room with good natural light. If you have a room with few windows, balance the 60 watt desk light with ambient overhead lights or increase it to 75 watt.
How many watts is considered bright?
Light bulb brightness is a measure of how much light comes from a bulb. A 40W bulb is equal to 400+ lm, which is the amount of light a bulb can produce. The higher the wattage, the higher the lm.
Does higher wattage mean brighter?
It’s not always a brighter light bulb when more Watts is used. Today’s light bulbs use less Watts to produce the same amount of light as they did in the past. When buying light bulbs, you should think lm, not Watts.
Is 3000 lumens bright enough?
The goal is to give a room a bright light. This isn’t ideal if you have a small room and a bedroom. When you are about to go to bed, you don’t want to blind yourself. If you want to light a 200 square-foot living room, you should use 2,000 lm.
How bright should a bedroom light be?
Ambient lighting in the bedroom should be between 2,000 and 4,000 lm, with a minimum of 500 lm for each reading light, and 400 lm for closet lighting.
How many lumens do I need for a bedroom light?
A sitting room or bedroom will typically require 10 to 20 lm per square foot, while a bathroom or kitchen will typically need 70 to 80 lm per square foot.
Is 800 lumens bright enough for a bedroom?
It’s best to use a warm light if you want a beautiful, soft setting. Bedrooms are similar to living rooms in that they are relaxing. The lower end of the lm should be used in warm weather.
How many lumens do I need for a bedroom ceiling light?
The kitchen is between 3,000 and 4,000lm. The dining room has a capacity of up to 4,000 lm. The living room can hold between 1,000 and 2,000 lm. The bedroom has a capacity of 1,000 to 2,000 lm.
How do you calculate the amount of light needed in a room?
If you divide the width of the room by the length, you get the minimum amount of power needed. The number of 60- watt equivalent bulbs is determined by dividing by 60. To figure out how many light fixture are needed, you have to add up the wattage in each bulb.
How do you calculate the lux level of a room?
The amount of light cast on a surface is calledilluminance.
How do I calculate LED lights for a room?
If you want to determine the needed lm, you need to take your room square footage and add it to your room foot-candle requirement. A 100 square foot living room that requires 10 to 20 foot-candles will need between 1,000 and 2,000 lm. A 100 square foot dining room needs between 30 and 40 foot-candles.
How many can lights for a 12×12 room?
The rule of thumb is between the cans and the wall. You would want two rows of lights in a 12 foot room. Considering it is a bedroom and you don’t need it as bright as a kitchen, you can probably get away with two rows of 4 lights.