There is a type called Explosionproof/Flameproof Enclosure. An enclosure that can resist the pressure developed during an internal explosion of specified gases and which prevents the transmission of the explosion to the atmosphere surrounding it.
Table of Contents
Is a Class 1 Div 2 motor explosion proof?
Class I locations must be explosion-proof, Class II locations must be dust-proof, and Division 1 motor must be dust-proof. The motor’s enclosure is designed to exclude hazardous materials.
Does Class 1 Div 1 require explosion proof?
Due to the potential for fire or explosion, there is a need for equipment that is explosion proof. Division 1 is a subset of Class I and is classified as an area where the gases, liquids, and vapors mentioned above can be found under normal operating conditions.
How do you know if a motor is explosion proof?
An explosion proof motor is marked with a name that identifies it as suitable for a hazardous environment. The hazardous location Class, Division, and Group will be clearly indicated by the nameplate if the motor is certified by an agency.
What is a Class 1 motor?
Class I locations have a risk of explosion due to the amount of atmospheric gases or vapors. They have to be labeled as explosion proof. To be classified as explosion-proof, Class I, Division 1 motor must have certain characteristics.
What is explosion proof rating?
To meet the criteria for the explosion proof rating, an enclosure must be able to contain any explosion from within its housing and prevent sparks from within its housing from starting a fire.
What is explosion proof classification?
There are class changes in NEC. Class I, II and III enclosures can be explosion proof if they contain an explosion sufficiently to prevent the explosion of the atmosphere around them.
What is meant by explosion proof?
The National Electrical Code states that explosion proof means an apparatus that is capable of withstanding a gas or vapor explosion. If there is an explosion, it will be contained in an enclosure.
Is Class I Div 2 explosion proof?
A Class I Division 2 light is not the same as a Division 1 product. There is no requirement for a light to contain an explosion to meet the requirements for Division 2. They can’t cause an explosion in environments that they’re approved to be used in.
What is explosion proof IP rating?
The International Protection Marking is a component of the classification system for the levels of protection against explosion and fire in electrical enclosures.
What is a Class 3 hazardous location?
Class III hazardous locations are areas where there are Easily ignitable fibers or flyings present because of the types of materials being handled, stored, or processed.
What is a Class 2 hazardous location?
There are two types of hazardous locations, the second being called a Class II location. The classification is created by the presence of dust in the air that is sufficiently large to make it explode.
What are the three NEC hazardous area classifications?
There are three different criteria types used to classify hazardous locations.
How do you classify hazardous locations?
The hazardous locations are categorized by class, group, and division. There are areas in class I where there areflammable gas, vapor, or liquid. The areas where dust is present are classified as Class II. There are areas whereignitable fibers are present.
What is gas Group IIC?
Atmospheres containing acetylene or hydrogen or gases and vapors of equivalent hazard are included in the group IIC.
What is Class I Div II?
Facilities that deal with flammable gases, vapors, and liquids are classified as Class 1 hazardous locations. The flammable materials are handled, processed, or used in a hazardous location, but are not usually present in concentrations high enough to beignitable.
What is a Class 1 Div 2 enclosure?
Facilities that deal with flammable gases, vapors, and liquid materials can use a Class 1 Division 2 Enclosure. The facility handling, processing, or using the materials in the hazardous location have concentrations that are notignitable.
What is a Class I Division II location?
Class I, Division 2 includes locations where volatile flammable liquids or flammable gases are used, but which would become hazardous in case of an accident or unusual operating condition.
What is an example of a Class 1 Division 2 location?
Class I locations are those where fumes and gases can be seen. Class II locations have the possibility of being found with dust.